Hello, in this article I will give information about width 50 cm leather splitting, a technique used in shoe making. Width 50 cm leather splitting is a process applied to reduce the thickness of the leather and make it more flexible. This process is done by separating the leather into two layers. Thus, the upper layer (grain) and the lower layer (split) of the leather are obtained. Width 50 cm leather splitting is important both aesthetically and functionally in shoe making. Aesthetically, the upper layer of leather has a smoother and shinier appearance. Functionally, the bottom layer of leather is more durable and breathable. Width 50 cm leather splitting is especially preferred in models such as sports shoes, boots and sandals.
How to make width 50 cm leather splitting?
Width 50 cm leather splitting is made with a special machine. The machine cuts the leather by squeezing it between two blades. The distance between the blades can be adjusted according to the thickness of the leather. The machine cuts the leather evenly and removes it in two layers. During this process, the moisture content of the leather must be appropriate. Leather that is too dry or too moist cannot be cut properly by the machine. In addition, defects on the surface of the leather (scratches, stains, holes, etc.) also affect the cutting quality. Therefore, before the width 50 cm leather splitting process, the quality control of the leather should be done.
What are the advantages of width 50 cm leather splitting?
The width 50 cm leather splitting process has many advantages. Some of them are as follows:
- Improves the quality of the leather: It improves the appearance of the shoe, as the top layer of leather is smoother and shinier. The bottom layer of the leather is more durable and breathable, improving the comfort and longevity of the shoe.
- Increases the efficiency of the leather: By reducing the thickness of the leather, it is possible to produce a greater number of shoes. It also prevents material waste by using the two layers of leather for different purposes.
- Increases the variety of leather: By dyeing the two layers of leather in different colours or processing them in different patterns, it is possible to create a greater number of models and designs.
If you want to get more information about the width 50 cm leather splitting process, you can contact us. Our company, which has been operating in the shoemaking sector for many years, offers you all shoemaking equipment, including width 50 cm leather splitting machine. Call us or visit our website to take advantage of our quality and affordable service. Translated with www.DeepL.com/Translator (free version)